Imperial Dental Lab | Dental Lab in Southwest FL

Bring your practice into the 21st century today. We give you everything you need to start for free — including a 3Shape scanner intraoral scanner.

Terms and Conditions: A 3Shape scanner (retail value $30,000) will be provided to the dental practice free of charge with lab bills over $5,000 per month during a twelve-month contract.

Fixed Restorations

Full Contour Zirconia

Our monolithic zirconia crown restorations are milled by highly trained technicians on some of the most advanced CAD/CAM equipment in the industry and offers the highest flexural strength of any ceramic restoration, but natural looking without compromising on strength, making them ideal for anterior restorations and patients prone to bruxing and grinding.

Turnaround time

8-10 days in lab

Preparation

 Modified tapered shoulder preparation
 120° chamfer prep
 Feather edge and bevels are not ideal

Indications

 Crowns, Bridges (any span), Implant Restorations, Hybrid Abutment
‍ Ideally suited for bruxers and grinders
‍ Esthetic alternatives to full cast crowns

Cementation

Conventional cementation

Notes from your technician

Restorations should always be adjusted at low speed, using a fine grit diamond, water, and air spray to keep the restorations cool and to avoid microfracture.

Layered Zirconia

Layered Zirconia provides a high strength alternative to other anterior restorative techniques. By applying a thin (.5 to 1.0 mm), high translucency facial porcelain over a restoration, we are able to dramatically enhance anterior esthetics, without compromising the inherent strength of zirconia.

Turnaround time

9-10 days in lab

Preparation

 Modified tapered shoulder preparation
 120° chamfer prep
 Feather edge and bevels are not ideal

Advantages

 Metal-free restoration
‍ No limit on size or length of restoration being designed
‍ Durability and strength of monolithic zirconia
‍ Utilizes micro layering technique with layered ceramic on the facial/buccal surface for the high level of esthetics
‍ Resistant to extreme hot and cold temperatures which lower the frequency of tooth hypersensitivity

Cementation

Conventional cementation

Indications

 Esthetic cases
 Suitable for both anterior or posterior crowns and bridges
 Matching natural teeth or adjacent restorations

Notes from your technician

Layered Zirconia restorations should always be adjusted at low speed, using a fine grit diamond, water, and air spray to keep the restorations cool and to avoid microfracture.

Veneers

Veneers can be fabricated as thin as 0.2 to 0.3 mm, depending on the treatment plan and can offer a less intrusive solution than crowns and braces. They are bonded to the surface of a patient’s preexisting dentition and follow the contours of their teeth. They are ideal for cosmetic enhancements such as closing diastemas and changing shades or position.

Turnaround time

5-10 days in lab

Advantages

 Maintain bone and tissue, protecting skeletal formation
‍ Fixed restorations look and feel like natural dentition
‍ Fabricated to last a lifetime, without sacrificing any of your favorite foods
 Available in Full Zirconia, Hybrid-Denture, or PMMA

Preparation guide

 Use a course round-ended diamond bur to remove a uniform thickness of facial enamel by joining the depth cut groove
 Angle the diamond bur to bevel back the incisal edge

Notes from your technician

When prescribing final restorations, you will achieve the best results when you send the following items:
 Detailed shading instructions, including desired gradients and texture
 Stump Shade
 Impression of the patient approved temporaries
 Photographs with the temporaries in place
 Full arch impression of the preparations and opposing arch
 Bite registration
 Occlusal plane registration/analysis—Stickbite, Kois Dento Facial Analyzer (preferred), or Facebow

PMMA Provisional

Our PMMA Provisionals offer durability and esthetics for a temporary restorative solution. This restoration is milled out of a dense block of PMMA, which provides the provisional with natural esthetics due to the material’s translucency. Available in 16 VITA® classical and bleached shades in both monocolor and multilayer options.

Turnaround time

8-10 days in lab

Indications

 Bridges
‍ Full arches
 Crowns
 Complex cases, including multi-unit situations

Preparation

 Modified tapered shoulder preparation
 120° chamfer prep
 Feather edge and bevels are not ideal

Cementation

Interim cementation

Notes from your technician

For facial reduction, three-wheel diamond depth cutters should be used for orientation grooves. For proximal reduction, round end tapered diamond bur is used as an extension for facial reduction.

Diagnostic Wax Ups

Achieving success with anterior restorations is one of dentistry’s biggest challenges. Patients expect contours and shade to be right the first time. Diagnostic Wax Up is an invaluable tool to create ideal temporaries and highly esthetic final restorations. Our team can guide you through treatment planning, prep design, material selection and reduce unproductive chair time.

Turnaround time

5-10 days in lab

Advantages

 Valuable communication tool for dentist, laboratory and patient prior to treatment
‍ Diagnoses potential problems
 Aids with tooth design and shape
 Provides patient with an understanding of what results can be achieved
 Helps ensure patient satisfaction

Preparation

 Highly detailed, full-arch, anatomical impression or scan
 Portrait-style and intraoral photos
 Bite registration

Notes from your technician

In order to produce precise-fitting final restorations, specific direction is required on the prescription form from the doctor regarding desired final restorative design (i.e. veneers, crowns, etc.). The type of matrices or interim restoration should also be clearly indicated (temporary matrix, preparation matrix, PMMA provisional).

Removable Restorations

Complete Dentures

As the number of edentulous patients continues to grow, we recognizes that implants are not necessarily an option for all patients. Using the best materials and processing techniques to support our customer’s needs. From immediate and esthetic indications, our dentures provide consistent, great-fitting prostheses along with complete pricing flexibility and predictability.

Turnaround time

Set-up for Try-in: 3-8 days in lab
Reset: 3-8 days in lab
Finish: 3-8 days in lab

Advantages

 Premium and economy options available
‍ Includes teeth, try-in, and finished product
‍ High-esthetic denture teeth with injected finish
 Simplified complete pricing for you and your patient

Preparation

Custom trays and occlusion rims for accurate bite registration are required

Notes from your technician

For accurate bite occlusal records please follow these requests:
 Always ask patient to CLOSE not bite
 Always ensure the Mid-lines match
A photo showing eyes and high smile is always great for our technicians to have when selecting teeth.

Tips for your patient

Caring for dentures properly will help prolong the life, prevent plaque or staining from forming, and prevent the denture from developing an odor. Just like natural teeth, dentures require daily care. Dentures can be cleaned with mild hand soap, dishwashing liquid or mild denture cleaners. Using toothpaste or a hard bristled brush is not recommended as they can cause damage and scratches. Because most dentures need to remain moist to keep their shape, soaking them in warm water or a mild denture solution is recommended.

Cast Removable Partial Dentures

Our Cast Removable Partial Dentures are designed digitally and cast in Chrome Cobalt alloy to provide strength, resistance to corrosion, and lightweight durability while delivering an accurate fit and extreme comfort for your patient. We strike the perfect balance between beauty, delicacy, and durability and are available with the same denture teeth and processing options as our complete denture lines. Additionally, we offer tooth-colored acetyl clasps as well as flexible pink or clear clasp options for your patients.

Turnaround time

FRAMEWORK: 5-8 days in lab
SET-UP: 2-8 days in lab
Finish: 3-8 days in lab

Advantages

 Simplicity of complete pricing
‍ Excellent fit and predictability
‍ Free survey and design
 Options available to add acetyl (natural tooth or gum-colored) clasps to enhance esthetics in the smile zone
‍ Premium and economy options available

Notes from your technician

A good alginate impression is highly recommended in order to achieve optimal results. For the doctors that do not want to pour their own impressions, there are many extended pour alginate impression materials available—please ask your ust for specific recommendations. Additionally, if scanning a cast partial, it is extremely important to grab as much of the anatomical landscape as possible.

Flexible Partials

Flexible Partials are crafted out of high-quality nylon thermoplastic material making them practically unbreakable and afford them an ideal degree of flexibility. They are nearly invisible, easily repairable as well as rebasable – ensuring quick chairside adjustments while providing a high level of comfort. Patients get used to them very quickly and soon forget they are even wearing a partial denture.

Turnaround time

4-8 days in lab

Advantages

 Utilizes undercuts in the ridge for retention and surrounding natural teeth for structure
‍ Extremely thin and lightweight
‍ Biocompatible
 Blends naturally with surrounding tissue and gums

Preparation

 Upper and Lower model or impressions
 Bite registrations
Vertical clearance of greater than 5mm required

Indications

 Ideal for patients who are allergic to monomers found in acrylic dentures
 Transitional restrictions
 Unilateral during implant healing

Notes from your technician

Flexible Partials provide a great solution for patients who want improved aesthetics without the cost associated with traditional crown & bridge restorations or implants. When prescribing a flexible partial please keep in mind that a minimum for 8-10 weeks healing is recommended as flexible partials cannot be relined in immediate situations.In order to keep your Flexible Partials looking and feeling like new, please follow these simple recommendations:
 Continue to brush your natural teeth and gums as directed by your dentist.
 Clean your appliance daily. Rinse under warm running water for approximately 10-30seconds to remove any food particles.
Brush your appliance with a soft denture brush using water only. Rinse again.
 Place your appliance in a denture cleaner for at least 15 minutes daily.
When possible, keep your appliance in water or a denture solution when you are notwearing it.
 DO NOT use bleach, toothpaste, or similar cleaning products, as these may scratch or discolor the surface of your appliance.

Implant Services

Surgical Solutions

Planning and Surgical Guides
Our Treatment Planning Service is a true collaboration between our technical specialists and the restorative doctor. Based on anatomical information obtained from the CBCT scan and the desired prosthetic tooth arrangement, together we determine ideal implant placement location and size, leading to a very predictable outcome and a perfectly fitting, esthetically pleasing final prosthesis. We provide surgical guides that are precise, easy to use and created to accurately fit your implant plan and patient’s anatomy.

Preparation

 CBCT scans
 Dual scans are required for edentulous patients
 Models – digital or physical, BOTH Maxillary and Mandibular
 Bite registration
 Shade selection
 Series of 6 photographs: full-face large smile, full-face in repose, retracted view, lateral view, full-profile large smile, and full-profile lips at rest

Advantages

 Predictable outcomes with implant position and stability
‍ Significantly improves final restorative esthetics
‍ Imperial Dental Lab accepts all CBCT scans

Notes from your technician

CBCT scans should be in raw dicom form, and models or scans should capture as many anatomical landmarks as possible. Scans or models should be taken within 3 months of planning. It is required that scan markers be used for all dual scans.Our Team will evaluate all CBCT scans upon arrival; new scans will be requested if distortion is discovered during the evaluation process.

Single Unit Implant Cases

Our single unit implant cases are digitally designed for predictable fit and outcome. You can rest assured the final result will not only seat perfectly, but also have ideal emergence from the gingiva and blend naturally with adjacent dentition.

Turnaround time

10-20 days in lab

Advantages

 Precision machined abutments
‍ Multitude of abutment options
‍ Applicable with all major implant systems

Indications

Any single-tooth site

Full Arch Implant Cases

Full arch, implant retained restorations or All on Xs uses as few as four implants to support and immediately loaded full arch prosthesis. This is a cost effective and graftless solution that is excellent for patients who no longer have enough bone to support traditional implant solutions.
We design and mill for most major implant systems and can deliver a customized prosthesis to meet the exact specifications of your case. With several full arch implant options, including Full Zirconia, Hybrid Denture and PMMA. Our team of specialists can assist you in planning for an exceptional outcome.

Turnaround time

14-21 days in lab

Advantages

Preparation

 Bite Registration
 Photos
 Patient approved try-in
 Impressions

Notes from your technician

For Full Arch Implant Cases the following are suggested for optimal results:
 A verification jig is strongly recommended. The jig can be done direct to implant level(this is dependent on path of draw), on Multi Unit Abutments (MUAs), or even doing anabutment try-in/impression in lieu of a verification jig.
 The use of the Sheffield test (one screw test) is recommended when trying in theverification jig. One screw will be tightened at one end of the framework, then check theother abutment sites for any fit discrepancies.
 A "fixed" bite rim is also recommended. This bite rim screws into the implant, multi-unitabutment, or over the custom abutments.
 A PMMA (if the case is zirconia) is suggested as a means to verify occlusion, esthetics,and to be used as a back-up should anything ever happen to the final restoration. In some instances, if the final restoration fractures, this PMMA can be used as a verification-jig, model of the temp, and the bite.For the most successful outcome, Full Arch Implant cases are best done in stages and not taken direct to final.

Implant Supported Overdentures

An Overdenture is a removable dental prosthetic that is tissue born but is retained using an implant attachment. Implant Supported Overdentures help to prevent changes in the jaw that occur with edentulous patients, last longer and are better tolerated than traditional dentures. Imperial Dental Lab offers a variety of overdenture solutions, including popular options such as ZEST locators, ERAs and milled bar.

Turnaround time

14-21 days in lab

Advantages

 Provide patients with stability while eating and speaking
‍ Function and feel like natural teeth

Preparation

 Custom tray and bite block after implants or attachments have been placed
 Wax try-in to verify placement of teeth before finish

Notes from your technician

Study models and full-face photos showing eyes and high smile is always helpful for your BonaDent technician to use when selecting teeth.

Tips for your patient

 Avoid biting the overdenture into place, as this force will result in improper wear of the LOCATOR Abutment and may affect the longevity of the prosthesis.
 To remove, patients should place one thumb under the left edge and one finger under the right edge of the overdenture and pull one side upward and the other side downward, simultaneously. Patients can also use their tongue to aid in the removal of the lower overdenture.
 Overdentures should be removed and cleaned daily.
 Refrain from picking at the abutments or retention inserts with toothpicks or other foreign objects.
 Do NOT eat without the overdenture in place, as food will scratch the abutment and may result in implant failure.

Digital Workflow for All-on-4 Implants

Occlusal Appliances

Hard/Soft Night Guard

According to the American Sleep Association, 10% of people damage their teeth through bruxing and grinding as they sleep. The use of a night guard can help prevent the chipping, cracking and strained jaw muscles associated with those conditions. With such a sizeable market, you have a tremendous opportunity to expand your offerings by prescribing Hard/Soft Night Guards. Prior to insertion, the guard is placed in warm water allowing the material to become pliable to ensure an intimate internal fit. Once cooled, the material will harden providing ideal strength.

Turnaround time

3-8 days in lab

Notes from your technician

Brush and floss teeth before inserting the night guard
 After use, rinse the night guard with water and store dry
 Clean the night guard with water only
 Do NOT soak the night guard in mouthwash, denture cleaner or alcohol
 Do NOT place the night guard in hot/boiling water or expose to excessive heat such as direct sunlight

Bite Splint

Our Bite Splint is the answer to the breakage, excessive wear and discomfort that results from bruxing and grinding. You can offer your patients this affordable and comfortable option to prevent nighttime damage and to protect their teeth. The Bite Splint is made of a 3mm hard copolyester outer layer and is available in both hard and hard/soft varieties. Both varieties provide outstanding durability and strength, while the hard/soft splint features an additional soft internal surface that rests comfortably against the teeth and gums.

Turnaround time

3-8 days in lab

Notes from your technician

Clear Aligners

Increasingly, patients are requesting aligners to straighten their teeth, but due to exorbitant aligners lab fees many decline treatment. Imperial Dental Lab offers a state-of-the-art solution to overpriced aligner systems. The affordability of our invisible aligners - Clearly Ortho can lead to a higher acceptance rate from your patients. The newly produced clear aligners can also provide the same corrective results as other brand-name clear aligners on the market. That’s because the Imperial Dental Lab invisible aligner is created by dental professionals using the state of the art 3D Orthodontic software.

Turnaround time

8-16 days in lab

Notes from your technician

Brush and floss teeth before inserting the aligners
 After use, rinse the aligners with water and store dry
 Clean the aligners with water only
 Do NOT soak the aligners in mouthwash, denture cleaner or alcohol
 Do NOT place the aligners in hot/boiling water or expose to excessive heat such as direct sunlight

Sleep Appliances

DreamTAP™

The American Academy of Sleep Medicine tells us that a significant number of men and womenare affected by snoring and mild sleep apnea and recommends oral appliances as a frontlinetreatment against both. Imperial Dental Lab are experts in making the most popular sleep apneaappliances like Myerson EMA and dreamTAP, an oral device intended to reduce or alleviatenighttime snoring and obstructive sleep apnea. As the 5th generation of the TAP appliance, thedreamTAP is the newest, most comfortable, and most effective TAP custom oral appliance. ForFor most patients, dreamTAP is over 90% successful as an elective standalone treatment for mild to moderate obstructive sleep apnea

Turnaround time

3-8 days in lab

Advantages

 Added tongue space for greater comfort
‍ Increased range of adjustment
‍ Custom-formed soft liners for superior fits
 Can attach to CPAP machines
 Stronger than surgical stainless steel
‍ Rust and corrosion-resistant
‍ Three hook sizes for a greater range of adjustment
 Nickel-free, 100% allergen-free
‍ Cobalt chromium hardware
‍ Tap technology, single-point adjustment

Indications:

8 or more healthy, natural teeth

Notes from your technician

The following are the clinical steps for a well-fitting appliance:
1. Take upper and lower impressions. The extension should go to the height of the contour of the gingival on all sides of the patient’s teeth.
2. Take a protrusive bite registration. Use of a George Gauge™ is ideal for this registration

Myerson EMA®

The Myerson Elastic Mandibular Advancement (EMA) appliance is a simple, patient-friendly oral appliance created for the non-invasive treatment of snoring and OSA. The design is brilliantly simple, extremely stable, and allows for adjustability through the interchangeable elastic straps. The appliance increases airway space by moving the mandible forward using interchangeable elastic straps—the shorter the strap, the farther the mandible is advanced. Given the prevalence of snoring and sleep apnea in both men and women, leveraging our knowledge and expertise in Sleep Appliances will enable you to expand your offerings, differentiate your practice.

Turnaround time

3-8 days in lab

Advantages

 9 different strap lengths
‍ 100% Latex-free
‍ Cost-effective solution
 Patient-friendly, metal-free design
 FDA approved and clinically proven to safely treat OSA and snoring
‍ Enhanced patient compliance in using the device on a nightly basis

Indications

 Can be used for any patient with either a full or partial set of natural teeth
 Remaining teeth should have sufficient height of contour for the device to gain retention at the gingival third
 Snoring
 Obstructive sleep apnea

Notes from your technician

The following are the clinical steps for a well-fitting appliance:
1. Take upper and lower impressions. The extension should go to the height of the contourof the gingival on all sides of the patient’s teeth.
2. Take a protrusive bite registration. Use of a George GaugeTM is ideal for this registration.

See Our Fee Schedule

Chrisad Fee Schedule

Our 3 Step Process

We empower dentists with fast, reliable laboratory services and state-of-the-art technology.

Step 1

We use the fastest and most accurate blue-light tabletop scanners, like the Medit T710, featuring fast scan engines and highly efficient software algorithms that produce a full-arch scan in just 8 seconds. Our design team consists of industry experts with decades of experience with leading applications like Exocad, 3 Shape, and Arch Form.

Step 2

We only use ultra-fast Roland DWX-52DCi mills and best in class 3D printers like Rayscan and Arfona to make highly accurate restorations and appliances. These technologies are built in accordance with the highest industry standards, making it simple to produce high-quality, cost-effective dental prosthetics.

Imperial Dental Lab makes dentistry digital from start to finish. Our full range of prosthetics eliminates the need to use multiple labs for fulfillment.

Fast Delivery

We ship same day as production. Delivery options include FedEx, UPS, USPS, and local courier for Fort Myers, Bonita Springs, Naples clients.

Increased Efficiency

By being a fully-digital dental lab, we receive your scan, fulfill your order, and ship your prosthetics directly to you in a fraction of the time.

Save Time

Our fulfillment system streamlines your operations. Submit your orders instantly and bypass the need for complicated forms and paperwork.

Better Results

Our decreased order times and higher quality standards mean that not only do you receive your orders in less time, but they are more accurate.

Preferred Fee Schedule for Chrisad members

Fixed Restorations

(8-10 Days)





Standard Fee

Preferred Pricing
(10% savings)

BruxZir® Crown

$69.00

$62.10

Layered Full Contour Zirconia Crowns

$89.00

$80.10

Esthetic Zirconia (Anteriors & Long Span Bridges)

$99.00

$89.10

Removable Restorations

(3-8 Days)





Standard Fee

Preferred Pricing
(10% savings)

Full Denture Set-Up

$89.00

$80.10

Denture Process & Finish

$99.00

$89.10

Flipper (Up to 3 teeth)

$109.00

$98.10

Bite Rim

$29.00

$26.10

Partial Denture Set-Up

$49.00

$44.10

Partial Denture Process & Finish

$99.00

$89.10

Flexible (Valplast) Partial Complete

$199.00

$179.10

Denture Teeth

○ Full Set

$49.00

$44.10

○ Individual

$9.00

$8.10

Denture Repair - Simple Acrylic/One Tooth

$69.00

$62.10

Implant Services

(10-21 Days)





Standard Fee

Preferred Pricing
(10% savings)

Screw Retained Implant Package
Soft Tissue Model, Lab Analog, Placement Screw, Ti Interface, SolidZirconia Crown

$355.00

$319.50

Aesthetic Screw Retained Implant Package
Soft Tissue Model, Lab Analog, Placement Screw, Ti Interface, ZirconiaCrown with Porcelain Facial

$431.00

$387.90

Custom Titanium Abutment Package
Soft Tissue Model, Lab Analog, Gold Nitride Ti Abutment and CementableZirconia or PFM Noble Crown Extra Alloy Charge for PFM-WHN or YHN

$355.00

$319.50

Zirconia Abutment / IPS e.max Package
Soft Tissue Model, Zirconia Abutment, Lab Analog, IPS e.max® Crow

$575.00

$517.50

Titanium Hybrid Denture (up to 5 implants)
Lab Analog, Soft Tissue, Bite Rim, Verification Jig, Titanium Milled Bar,Premium Denture Teeth

$2,530.00

$2,277.00

Titanium Hybrid Denture (6 or more implants)
Lab Analog, Soft Tissue, Bite Rim, Verification Jig, Titanium Milled Bar,Premium Denture Teeth

$3,105.00

$2,795.00

All Zirconia Screw Retained Bridge
Soft Tissue Model, Lab Analog, Bite Rim, Verification Jig, PMMA Bridgewith Pink Composite & Solid Zirconia Screw Retained Bridge with PinkComposite

$3,450.00

$3,105.00

Surgical Guides
Please call to determine the best surgical guide to use

$399.00

$359.10

Occlusal Appliances

(2-16 Days)





Standard Fee

Preferred Pricing
(10% savings)

Athletic Guard

$89.00

$80.10

Night Guard

○ Hard or Soft

$89.00

$80.10

○ Individual

$109.00

$98.10

Bleaching Tray

$59.00

$53.10

Clear Aligners

○ Up to 5 stages of trays

$499.00

$449.10

○ Up to 10 stages of trays

$949.00

$854.10

○ Up to 20 stages of trays

$1,799.00

$1,620.00

Sleep Appliances

(3-8 Days)





Standard Fee

Preferred Pricing
(10% savings)

dreamTAP™

$437.00

$393.30

Denture Process & Finish

$379.00

$341.10

Located in Bonita Springs, FL

Our state-of-the-art digital laboratory is conveniently located on Bonita Beach Road, down the street from Walgreens and CVS Pharmacy.

Monday

8AM- 5PM

Tuesday

8AM- 5PM

Wednesday

8AM- 5PM

Thursday

8AM- 5PM

Friday

8AM- 5PM

Saturday

8AM- 5PM

Sunday

Closed

Mon - Fri

8AM- 5PM

Saturday

8AM- 5PM

Sunday

Closed

We are located next to Walgreens, passing Imperial.

Get directions

Get started with Imperial Dental Lab

Are you a Dentist or a Dental Practice Owner? Tell us about yourself and we’ll be in touch soon!

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Your 100% digital dental lab in Florida

Crowns, Bridges, & Implants

Get Started in Digital Dentistry

Fixed Restorations

Full Contour Zirconia

Layered Zirconia

Veneers

PMMA Provisional

Diagnostic Wax Ups

Removable Restorations

Complete Dentures

Cast Removable Partial Dentures

Flexible Partials

Implant Services

Surgical Solutions

Single Unit Implant Cases

Full Arch Implant Cases

Implant Supported Overdentures

Occlusal Appliances

Hard/Soft Night Guard

Bite Splint

Clear Aligners

Sleep Appliances

DreamTAP™

Myerson EMA®

Our 3 Step Process

Step 1

Step 2

Step 3

Discounts & Offers

Your first case

Start today & receive

Your First Case

Start today & get

Send us 3 crowns

Get the 4th crown

Your first case

Start today & receive

Your First Case

Start today & get

Send us 3 crowns

Get the 4th crown

100% Digital Dentistry for Increased Productivity

Fast Delivery

Increased Efficiency

Save Time

Better Results

Preferred Fee Schedule for Chrisad members

Located in Bonita Springs, FL

Get started with Imperial Dental Lab

Contact us

Visit us

Navigation

Legal

Contact us today